Author: kylew

  • John Deere 730 in Deep Snow

    If you make a path in the snow once it starts to melt, where the tracks are melts out a lot faster. Also, where possible, the use of the blade also assists in its melting. As you can see, it was very deep!

  • Flight Across the Snow

    With the sun shining and winter only serving as a reminder as to how much more snow we are able to receive, I thought it would be fun to post a video of the DJI Phantom 3 drone lightly gliding across its glimmering beauty. As far as the experience is concerned, this comes as close to cruising across the fields on a snowmobile as I can get. The film was shot around the first of February, 2016.

  • Feeding the beef cattle with the 630

    If you just read my post about the 730, then know that the 630 is the little brother to the 730. It came in only two fuel types–“all-fuel”, which is for lower-grade fuels, and gasoline. This machine is a gasoline only model, 1958 model year.

    The 630 was the direct replacement for the “Model A”. I’ve always enjoyed the A, and the 630 is basically a late-style A.

    In this video I’m taking a hay bale over to the beef cattle with our custom made bale feeder. It’s a conversion from an old round bale bagger (which would put the round bales into plastic sacks).

  • John Deere 730 Diesel

    The 730 Diesel is a pretty impressive machine. It was Deere’s largest row-crop two-cylinder, and also happened to be the last series to feature the two-cylinder before their introduction of the “New Generation” machines in 1960. The 730 was about the same size as the 3010, which according to Deere literature at the time, was its direct replacement.

    Driving a 730 Diesel is unlike any other machine, before or since (with the exception of the 720). This particular machine is a direct-drive electric start. The 720, which was a near-identical model before it, had more pony engine starters than electric starters. The Pony, or cranking engine, was a small gas engine that you would start up first, which would then be used to turn over the large diesel engine. The electric starters were large 24 volt starting systems.

    Since not everyone will have an opportunity to drive a 730 Diesel, I thought I’d share this video to replicate the experience as well as I can.

  • Drone Farm Footage

    Ever since I watched the movie “The Straight Story” for a class in college, I’ve had a desire to do aerial photography and videography of events on the farm. I’ve recently purchased the DJI Phantom 3 Advanced drone, which has been one of the most amazing pieces of technology I’ve used in a long time.  It has more than met my expectations for what I have purchased it for.

    Enjoy.  🙂

     

  • Cutting Grass with the John Deere Number 5 Mower

    I took the opportunity to have some seat time with the Model A and Number 5 mower. There was some tall grass that needed to be cut down as to not be a fire danger once it dries up. The grass was really tall, but the mower and tractor did a good job. Most of the issues were with the operator, as I’m used to using more modern equipment to cut hay with…

    The Number 5 Mower was fun to use though, as it used to be my grandfathers mower, on my moms side. My grandpa used to spend a lot of time with it, so my restoring it and using it has a sentimental value to it as well.

  • Summer 2015 Update with Videos

    Wow, it’s been a while since I’ve updated the blog last. Basically, as far as farming goes, my spring/summer can be summarized as the following.

    The first project was the restoration of the 1957 John Deere 420 Utility. I went to Utah and picked up another 420 parts tractor. I was pretty fortunate to stumble across one online for a good price, so I jumped at the opportunity to take it. I brought it home, and used it to fix my current 420 utility. They were both the same year, too, so it worked pretty well.

    After that, the crank of my 1959 John Deere 630 was finally fixed. I brought it home too, but then had the 420 project come up, so I spent time getting that done instead. Once I was finished with the 420, I spent some time working on the 630 and was able to get it working as well. The 630 project was completed after spring planting and alfalfa cultivating, which cut into the projects time, but was a priority.

    Afterwords, it rained. It rained and it rained. The good thing was, we never had to use the sprinklers for first crop. It did stop raining, and instantly went to very hot/dry temperatures, so I was able to cut the alfalfa with the John Deere 4230 and 945 MoCo (mower conditioner, aka swather). We then waited about 3/4th of a week, then raked the hay. I used the newly restored 420 Utility for most of the raking–and it worked great! It was fun spending some seat time on a machine that I spent so much time with the restoration process.

    After the raking came the baling. With all the rain we had, there was a very good high yield of bales. The yield was much higher than last year. I used the JD 4640 and Hesston 4790 3×4 big baler for the baling.

    Anyway, that about sums it up. I’ll post some videos here and in future posts. Enjoy.

     

  • Plowing Snow across the Dry Farm on the John Deere Model G

    This weekend we will be moving the beef cattle to the dry farm in preparation for calving season. The dry farm has shelter (trees) and the hill, which is good for keeping dry once the snow starts to melt. If you’ve seen a flat field with cattle on it in the spring time, it can get pretty messy. Anyway, I took the G over to where they will be to help keep the road open, where we aren’t using it daily (yet). It’s always fun to have an excuse to get out on the two-cylinders, and the G does quite well with the 3-point mounted blade.

  • Feeding Beef Cattle GoPro with Head View

    Feeding in the Fog with the John Deere 3020 and custom-made bale feeder. Here I am feeding 3x4x8 feet large square bales. Hereford and Angus beef cattle on an early January evening, 2015. Taken from a GoPro that was strapped to the top of my head.

  • Where we’ve received a lot of snow the past few days, I used it as an excuse to get some seat time on the G by making a little road though the field to feed the cattle with. I think it did a pretty good job–even if it did snow a lot the following night… Guess I’ll have to do it again. 😉 If you get bored, there’s GoPro footage at the end. There’s no sound because the sound wasn’t worth including.